The side of the 36 Inch 5 Burner Electric Cooktop has air inlets and outlets, and there is a fan inside. What causes the power reduction when this cooker is in use? Here is what the editor has summarized:

If the configuration of the 36 Inch 5 Burner Electric Cooktop is lower, it is easier to reach the rated capacity of the accessories, and thus it generates more heat. This principle is similar to how the thickness of the power cord determines the heat generation and current resistance of the power cord. In real life, the thinner the power cord in our home, the hotter it gets, and the smaller the load it can bear. Moreover, the thicker the power cord, the greater the current, and the less heat it generates compared to the thin one.

Similarly, the higher the configuration of the 36 Inch 5 Burner Electric Cooktop, the less heat it releases under the same load, and the greater the power load it can withstand. Therefore, the high-configured 36 Inch 5 Burner Electric Cooktop can continue to operate at full power because the internal component configuration is higher than the power load. This method of preventing overheating reduces heat generation on the one hand and increases the heat resistance of the components on the other.

The 36-inch 5-burner electric cooktop is elegantly designed and features ultra-quiet technology. It does not involve open flame combustion and does not emit waste gas. It is an excellent product for enhancing a green kitchen.

36 Inch 5 Burner Electric Cooktop https://www.dopeninductioncook.com/36-inch-electric-cooktop-5-burner-electric-stove-top.html